W-Series automatic sealers are designed for the continuous sealing of
thermoplastic materials. The W-455A is equipped to seal materials up
to 18" wide and 15mil total thickness. Unit is controlled by a plug-in
transistorized circuit board. Equipped with an electronic timer and
electromagnet, once correct settings have been established, consistent
seals will be maintained automatically.
Automatic impulse sealing with precise electronic control
Dual mode operation: automatic or manual
Foot switch allows both hands to be free
3 separate control settings for sealing time, recycle time, and congealing time to produce consistent seals
Includes electric foot switch and worktable
Seal Length: 18" / 450mm
Seal Width: 5mm
The manufacturer's replacement kit includes 2 heating elements.
Easy to operate.
automatic operation, set the control on auto. Adjust the sealing time
(heating time), congealing time (cooling time), and recycle time
(automatic operation of jaws). Insert material to be sealed and when
jaw opens, remove sealed material.
For manual operation, set the
control to manual. Insert the material to be sealed. Press down on the
foot switch to activate the sealing bar.