Easy to operate
Protector bars around sealing jaws
Seals a variety of thermoplastic materials
German manufactured temperature controller
PTFE coated jaws
Seal length: 8" (200mm), 12" (300mm), 18" (450mm)
Seal width: 15mm
Seal style: meshed or serrated
Option: sit down or stand up operation
W-Series direct heat foot-operated sealers seal many different types of
thermoplastic materials including: coated aluminum foil, Kraft paper,
cellophane, polypropylene, poly-nylon and other thicker materials.
Please note: direct heat sealers cannot seal polyethylene. Model #s
ending in DT are equipped with meshed (++) seal bars while the model #s
ending in DTS are equipped with serrated (==) seal bars.
on the model of the sealer, material up to 18" wide and 20mil total
thickness can be sealed. Units are equipped with a German manufactured
thermostat that accurately controls the temperature from 30°-550° F
(0°-300° C). Both jaws are heated simultaneously so there is better
heat penetration to seal thicker materials. Our W-Series direct heat
sealers include an adjustable work table. The pedestal stand is 26",
but an optional 36" stand is also available.
W-Series direct heat sealers are equipped with protector bars around the jaws to prevent injury.
to operate. Set the temperature on temperature controller depending on
the material to be sealed. Once the correct setting has been reached,
consistent seals will be maintained automatically. Insert the material
between the two sealing bars. Press down on the foot board and release.