Tach-It LB-2 Semi-Automatic Bottle Labeler
This semi-automatic bottle and cylindrical product labeler is designed to meet the needs of growing companies, lower volume users, specialty packers, or as a backup for fully automated equipment. Easy-to-use for any round bottle or container ranging from 1/2" to 4" inch diameter, the LB-2 has built-in product fixtures for consistent placement, automatic overhead pressure arm, and can apply a front label or a front and back label (with alternating labels on the web), is built for 24/7 productivity, and has a powered rewind for the waste. The Tach-It LB-2 is designed to handle label rolls up to 12 inch in diameter on a 3 inch core. No special operator training is required as setup and controls are easy to use and understand. Unlike many other bottle labelers in the industry, the Tach-It LB-2 does not require air, has a small bench top design for use anywhere, requires no tools for label changeover, and has high friction, non-slip silicone rollers for positive feed of the labels and rotation of the product. To use the Tach-It LB-2 simply place the product into the adjustable cradle assembly and step on the foot pedal. The automatic overhead pressure arm will come down holding the container in place and the container will rotate and either 1 or 2 labels will be quickly applied. The machine is now ready for the next cycle. Note: all labels used on the LB-2 must be die-cut and have a minimum 1/8 inch (3mm) gap between labels.
Machine Size: Length - 22", Width - 13", Height - 21-1/2"
Weight: 45 Lbs.
Bottle Diameter: 1/2" Minimum - 4" Maximum
Minimum Label Size: 3/8" x 3/4"
Maximum Label Size: 6" x 9"
Maximum Label Roll Diameter: 12"
Core Size: 3"
Power: 110/220 Volt Dip Switch Controlled
Speed: 20-30 Containers per minute, depending on diameter